Festo MPA-ASI Series, Руководство пользователя

Страница: 185 / 208

A. Technical appendix
A−17
Festo P.BE−MPA−EN en 0802c
Technical specifications on the electronic module of the
MPA−S valve terminal with CPX terminal or CPI module can
be found in electronics manual for the module (see system
manual for your CPX terminal, table Manuals on the CPX
terminal").
A.2 Festo accessories
In the following table only some of the accessories for the
MPA−S valve terminal are listed.
The complete range of accessories can be found in the Festo
catalogue (see www.festo.com\catalogue).
Accessories Type designation
General information
Blanking plug type M7
Blanking plug type G1/4
Manual override cover (manual override not accessible)
Manual override cap (manual override can only be operated in
non−locking mode)
Inscription label holder
Additional fastening bracket for wall fitting
B−M7
B−1/4
VMPA1−HBV
VMPA1−HBT
VMPA1−ST−1−4
VMPA−BG−RW
MPA−S valve terminal with multipin connection
Ready−to−use multipin cable with socket:
for terminals with 4 valve locations
for terminals with 4 valve locations, suitable as drag chain
for terminals with 8
Ū
24 valve locations
for terminals with 8
Ū
24 valve locations, suitable as drag chain
Multipin plug without cable
Hat rail mounting kit
VMPA−KMS1−8−...
VMPA−KMS2−8−...−PUR
VMPA−KMS1−24−...
VMPA−KMS2−24−...−PUR
VMPA−KMS−H
CPA−BG−NRH
MPA−S valve terminal with CPX terminal
Hat rail mounting kit CPX−CPA−BG−NRH
Tab.A/11: Accessories for the MPA−S valve terminal