Festo FSSC-12, Руководство по эксплуатации

Страница: 22 / 88

Commander
Festo FSSC−12 0410a English
22
6 Fittin g
Fittin g m e c h a ni ca l c o m ponent s
The unit is mounted on front panels, front doors, or on the side areas of the
cabinet.
6. 1 Mo u ntin g on f ront p a nel s , f ront d oor s , or on the s i d e a re as o f the ca binet
1. Prepare a square cut−out on the surface. Install dimensions front frame
92x92mm³, front panel thickness max. 13 mm.
2. Place the FSS−F−12 (Fig.9) front frame in the prepared front panel cut−out, from
the outside.
3. Introduce the device into the front frame from the inside. The clamping jaws of
the front frame
2
must be pushed into the upper and lower device guides
3
.
The two opposite projections on the inner flanks of the front frame
1
must
engage in the provided cut−outs of the device
4
.
4. Prevent unauthorized activation with the lockable FSS−K−12−C protective cap
(Fig.10). Use of the protective cap is mandatory for protection class IP54.
Fig.9
Fig.10
2
3
4
1