Festo FSSC-12, Руководство по эксплуатации

Страница: 24 / 88

Commander
Festo FSSC−12 0410a English
24
De s i g n a tion Extern a l s i g n a l inp u t
L
IN
External reset signal. The reset button on the Commander can be
blocked to limit the tripping location of the signal to the external
transducer (chapter 8).
END
IN
External signal for stop after cycle end. Corresponds to the single
cycle setting on the Commander. When tripping the signal in run
ning automatic mode, the started cycle is ended.
6.3 C onne c tion s to the s eq u en c e c ontroller
Connect the outputs A
XX
on the rear of the Commander, to the inputs of the Festo
FSS−12−C Quickstepper according to the following diagram (see also Fig.3):
F SSC − 12
C o mma n d er
o u tp u t s
F SS − 12 − C
Q u i c k s tepper
inp u t s
F u n c tion on the Q u i c k s tepper
A
P
P Operating pressure. This connection is interrupted
when activating an external EMERGENCY−STOP
button.
A
X1
X
1
Triggering the first input. X
1
is always linked to the
start of the sequence controller.
Press the start button: X
1
is charged with com
pressed air, the first work step is triggered on A
1
.
A
MAN
MAN/P Manual pre−select of the sequence controller via
the Auto/Man selector switch on the Commander.
With switch position MAN, set−up or step mode is
activated; with switch position Auto, automatic
operation is activated.