Festo EMCS-ST, Руководство по эксплуатации

Страница: 13 / 86

6.3 HMI menu
The display and operating components (HMI) can be used to perform the following functions in the
HMI menu:
–
Unlock pushbutton actuators (Unlock HMI), press and hold for 3 s
(Condition for IO-Link operation: IO-Link parameter 0x000C.4 = false)
– Menu function with pushbutton actuators select (selecting menu), press
– Parameterise setpoint values Speed Out, Speed In and Force
(Set value: 10, 20,..., 100% of the maximum value
è
Instructions of the drive system, technical
data) and save (Save), press
– Parameterise the position of the reference end position "Ref" (Set Ref) and run the homing move-
ment Mov
Ref
(Start
Ref
: Pos
Act
è Lim
In
è Lim
Out
), press
– Run Start Press movement (Start/Stop) and save Start Press Position Pos
Start Press
(Save), press
– Execute Demo Run (Start/Stop)
– Lock pushbutton actuators (Lock HMI), press and hold for 3 s or no pushbutton actuator input
for 15 s
– Reset to factory setting, press and hold , and simultaneously for 10 s
HMI menu structure
The following figure shows the states of the LED displays for the parameters and the menu selection,
the state transitions between the menu sequences (pushbutton actuator navigation) and the motions
of the drive systems when performing motion tasks.
Display and operating components (HMI)
13 Festo — EMCS-ST — 2020-04a