Festo CPX-P-8DE-N Series, Описание

Страница: 12 / 132

Contents and general instructions
X
Festo P.BE-CPX-P-EA-EN en 1209NH English
The following CPX bus nodes and the CPX-FEC with the revi-
sions specified here are required for operating CPX-P mod-
ules:
CPX bus node/CPX−FEC Required revision
1)
CPX−FB11 (DeviceNet) from Rev 23
CPX−FB13 (PROFIBUS) from Rev 28
CPX−FB32 (EtherNet/IP) from Rev 18
CPX−FB33 (PROFINET IO) from Rev 20
CPX−FEC
2)
(Modbus/TCP) from Rev 21
1)
Revision (Rev) see rating plate
2)
Only in the Remote I/O Ethernet operating mode
Tab. 0/2: Bus node revisions
Up-to-date information regarding components, modules and
bus nodes that are permitted for variant P CPX terminals can
be found in our catalogue (
www.festo.com/catalogue).
Possible incorrect application
– Operation of CPX-P modules in combination with incom-
patible interlinking blocks (e.g. interlinking blocks in
plastic version CPX-GE-EV-…) is impermissible.
– Operation of CPX-P modules in combination with pneu-
matic modules, CPX-EA modules and bus nodes which are
not approved for use with CPX-P modules is impermiss-
ible (
www.festo.com/catalogue).
– Operation of CPX-P modules that are designed for intrins-
ically safe circuits with connection blocks that are de-
signed for
non -intrinsically safe circuits is impermissible.