Festo CPX-CTEL-4-M12-5POL, Описание

Страница: 16 / 59

2 System overview, CTEL system
16 Festo – P.BE-CPX-CTEL-EN – 1601b – English
2.5 I/O configuration presetting
The I/O configuration presetting is implemented via the DIL switches on the left side of the CTEL master
module, directly below the housing cover. These are only accessible if the module is removed from
the CPX system.
Fig. 2.5
2.5.1 DIL switches
1 2
1
DIL switch group 1 (I/O mode)
2
DIL switch group 2 (I/O length)
Fig. 2.6
The I/O mode of the CTEL master module is set via DIL switch group 1 (
è
Tab. 2.5). The setting of
the I/O length, i.e. the determination of available I/O bytes per I-Port, is implemented via DIL switch
group 2 (
è
Tab. 2.6).