Festo CPX-AP Series, Руководство по эксплуатации

Страница: 29 / 34

ID hex (dec) Message Description
Transferred device address is invalid.
Remedy – Check address configuration. Is the con-
figuration set via software or hardware
(DIL switch)?
– Check the assigned address for the
device.
– Check multiple address assignment.
– Check the DIL-switch setting.
08
|
00
|
012E
(134218030)
Device address
invalid
Diagnost-
ic status Warning
A wire break was detected for the channel.
Remedy – Check wiring.
08
|
00
|
0135
(134218037)
Wire break detected
Diagnost-
ic status Error
The AP system communication to a module is aborted.
Remedy – Restart AP system.
– Check the cable.
08
|
01
|
0127
(134283559)
Communication to AP
module interrupted
Diagnost-
ic status Error
An IO-Link diagnostic event (note, warning or error) has
occurred. IO-Link event-specific details are attached to
this message.
Remedy
è
Description IO-Link Master or IO-Link
device
08
|
0A
|
0108
(134873352)
IO-Link event
Diagnost-
ic status Information
Warning
Error
A CRC error was detected in an internal user file.
Remedy – Restart device.
– Service required
0B
|
03
|
00B0
(184746160)
CRC error in user file
Diagnost-
ic status Error
Initialisation of the device failed. 0B
|
07
|
00CC
(185008332)
Initialisation failed
Remedy – Check whether additional diagnostic mes-
sages are pending.
– Reset device to factory settings.
Diagnostics
29 Festo — CPX-AP — 2019-06