Festo
CPVASI4E3AZ
2018-11c English
11
3.6 Connection example – valve terminal type 10
1
AS-Interface master
2
Combination power
supply from Festo
(electronically safe
guarded/short-
circuit proof )
3
Load voltage can
be switched off
1
2
3
3.7 Converting the valve terminal
The CPV valve terminal can be fitted with double-solenoid
and/or single-solenoid valves. During conversion, the new
valve terminal configuration must be set on the DIP
switches on the bottom of the electric sub-base.
1
DIP switch on the
bottom of the sub-
base
1
Instructions on removign the electric sub-base can be
found in the Pneumatics Manual. The permitted valve
combinations as well as the relevant DIP switch settings
can be found in the table in section 3.3.
