Operation
38
© Festo Didactic CP Factory / CP Lab ° application module drilling
6.5
Parameter of application
Default:
Parameter-number
Description
1
Program number [-]
1: Drilling on the left (as viewed in the transport direction)
2: Drill to the right (seen in the transport direction)
3: Drill both sides (as viewed in the transport direction)
Limitation: No limit of the value in the transition table
2
Not used
3
Not used
4
Not used
MES:
Operation
Parameter-
Number
Description
Nr. Name
120 Drill right side
1
Program number [-]
Limitation: 1-3, value: 2, constant
121 Drill left side
1
Program number [-]
Limitation: 1-3, value: 1, constant
122 Drill both sides 1
Program number [-]
Limitation: 1-3, value: 3, constant
123 Drill
individually
1
Program number [-]
Limitation: 1-3, value: 1, variable
Содержание CP Lab
Страница 1: ...Festo Didactic CP Factory CP Lab 06 2017 CP Factory CP Lab Manual application module iDrilling...
Страница 32: ...Operation 32 Festo Didactic CP Factory CP Lab application module drilling Automatic Mode sequence step 1 6...
Страница 33: ...Operation Festo Didactic CP Factory CP Lab application module drilling 33 Automatic Mode sequence step 7 12...
Страница 34: ...Operation 34 Festo Didactic CP Factory CP Lab application module drilling Automatic Mode sequence step 14...
