Festo CP Lab, Руководство пользователя

Страница: 30 / 39

Start up
30
© Festo Didactic CP Factory / CP Lab ° application module drilling
Requirements
– Pneumatic port of the cylinders has been made.
– Compressed air supply is switched on.
Procedure
1. At first, turn off the two one-way control valves completely. Then turn them on again by about one
rotation.
2. Start a test run.
3. Turn on the one-way flow control valves slowly until the required piston speed has been reached.
Documents

Data sheets
One-way flow control valve (193138)
5.5 Visual inspection
Visual inspection must always be carried out before starting up!
Before starting the application module, please check:

the electrical connections

the correct fit and the condition of the compressed air supplies

the mechanic components regarding visible faults
(cracks, loose connections etc.)

the function of the Emergency-Stop settings
Please make sure that all damages discovered are removed before starting the application module!