Festo CP Lab, Руководство пользователя

Страница: 2 / 39

2
© Festo Didactic CP Factory / CP Lab ° application module drilling
Order-No.:
Date: 06/2017
Layout: 06/2017, Schober
Filename: CP-AM-iDRILL-GB-A001.doc
© Festo Didactic SE, 73770 Denkendorf, Germany, 2017
Internet: www.festo-didactic.com
E-Mail: did@de.festo.com
Note
Where only pronouns such as he and him are used in this manual, these pronouns are of course
intended to refer to both male and female persons. The use of a single gender should not be
construed as gender discrimination; it’s intended solely to make the manual easier to read and the
formulations easier to understand.
Intended use
This installation was developed and manufactured for use in basic and further training in the fields
of automation and communications. The training company and/or the training staff must ensure
that the trainees observe the safety precautions.
Festo Didactic accepts no liability for injury or harm to trainees, the training company and/or any
third parties occurring when the installation is used for any purpose apart from training, except
Festo Didactic has caused such injury or harm intentionally or by grossly negligence.
At CP factory installations, it is not permissible to experiment with hazardous live voltages.
Reproduction, distribution and utilisation of this document, as well as the communication of its
contents to others without explicit authorisation, are prohibited. Offenders shall be held liable for
payment of damages. All rights reserved, in particular the right to file patent, utility model and
registered design applications.
Furthermore this manual describes setup and possible uses of the singular stations. It contains all
information and data required for commissioning, maintenance and operation.