Festo Compact Performance CPV Series, Руководство пользователя

Страница: 24 / 74

1. Installation
1−12
Festo P.BE−CP−SD8−...−EN en 0503b
Detailed instructions can be found in the manuals for your
control system.
Please note
S
Avoid long distances between the power unit and the
CPV valve terminal. If the operating voltage cable is too
long, the voltage supplied by the power unit will be re
duced.
S
If necessary, ascertain the suitable cross−sectional area
and the maximum permitted length of the cable.
1.3.2 Preparing the connecting cables
The connections of the field bus interface and of the load volt
age are in the form of plugs. Please refer to the following
pages for:
the pin assignment of the field bus interface and
the pin assignment of the load voltage connection
Field bus cable
S
Use screened cables with a metal M12 plug for the field
bus connection (see Appendix A, Accessories)
Load voltage connection
S
Use plugs from the Festo range for the load voltage con
nection. These plugs should match the outer diameter of
the cables used (see Appendix A, Accessories).