MACHINES AND
ACCESSORIES
Page 27 of 41
10.2Starting/Stopping
To start the sander, press the green button, marked with the symbol (I), as shown in Figure
15.
By pressing this button, the electric motor is powered and both of the abrasive tools are set
in rotation (belt and disc).
Figure 14 - Starting the sander.
Conversely, to stop the sander, press the red button, marked with the symbol (0), as shown
in Figure 15.
By pressing this button, the electric motor is disconnected from the power supply and both of
the abrasive tools are stopped (belt and disc).
Figure 15 - Stopping the sander.
Risk of abrasion
After pressing the stop switch (0), the abrasive tools continue to rotate by inertia for a few
moments.
Do not allow body parts near the belt or the disc while in motion!
fervi.com
