MACHINE AND
ACCESSORIES
Page 12 / 26
4.2 Plate
The following identification plate is attached to the front of the portable chamfering machine.
Figure 2 – Identification plate
4.3 Pittogrammi
On the side of the machine the following attention and warning pictograms are attached.
Figure 3 – Attention and Warning Pictograms
5
COMMISSIONING OF THE MACHINE
The portable chamfering machine Art. 0022 is supplied completely assembled.
5.1 Connection to the power supply and start-up test
1. Insert the power supply plug into a grounded double pole socket (10/16 A, 250 V).
2. Press the green power button on the back of the machine (see Figure 4).
3. Start the machine by pressing the confirmation button and the enabling switch, which
are present on the rear handle (see Figure 5) and make sure that the direction of
rotation of the tool is consistent with that envisaged by the manufacturer.
Impact of thrown parts
During the test run, no operator and no other person should be within range of the machine.
DO NOT PERFORM
ANY INTERVENTION
ON THE MACHINE
BY HAND WHEN THE
MACHINE IS
fervi.com
