MACHINE AND
ACCESSORIES
Page 22 / 26
Repeat this procedure for all 6 inserts.
Figure 17 Wedge (A), Screw (B), Insert (C).
Note: the inserts have all four sides sharpened and can be reused by changing the
orientation. When all 4 sides have been used they must be replaced.
Ejection of parts
Do not attempt to sharpen worn inserts. After using all 4 sides they must be replaced.
Introduce in order the insert, the wedge and the locking screw.
Cutting direction
The insert has the cutting edge inclined in the direction of rotation of the spindle.
Pay attention to the cutting edge when rotated or replaced.
Figure 18 Position of the insert.
fervi.com
