Ferroli HSW 11.1, Инструкция по установке и эксплуатации

Страница: 30 / 48

CONTROL SYSTEM
30
Control system devices installation
They should be located in the main room of the zone they manage
taking into account the following criteria :
- the place of installation should be chosen so that the sensor can
measure the room temperature as accurately as possible without
being influenced by the direct solar radiation or by other hot or cold
sources (about 1,5 meters above the floor);
- in the case of wall mounting, enough clearance above the device
must remain, enabling it to be fitted and removed.
REMOTE THERMOSTAT AND REMOTE CONTROL ( WIRED OR WIRELESS )
The power supply of the remote thermostat and of the remote control is supplied by the mounting base. When the devices are
removed from their base, power is cut off and the devices are out of operation. The wireless remote control is powered by three
1,5 V alkaline batteries type AA (LR06).
96
9
6
9
1
4 7
1 2
4,2
6
5
0
6
56
60
min.
10 cm
Remote thermostat
42
5
8
1
0
0
1
82
4,2
9
56
60
0
0
1
80
1
1
9
3
7
6
Remote control
1 CL+ BSB data
2 CL- BSB ground
3 G+ Power supply
1 CL+ BSB data
2 CL- BSB ground
Wired
Wireless