GENERAL FEATURES
Accessories
Remote thermostat
Allows operating mode selection and set point adjustment. The on board temperature sensor can be used in
order to realize a climatic control.
Remote control
(wired or wireless)
Replicates all the control and visualization functionalities of the controller installed on the unit. The on board
temperature sensor can be used in order to realize a climatic control.
Wireless transmitter
Connected to the unit controller, allows to communicate with wireless remote control and wireless outdoor
temperature sensor.
Wireless repeater
Extends wireless operating range.
Wireless adaptor for out-
door temperature sensor
Allows to transform the wired outdoor temperature sensor, standard for all the units, in a wireless sensor.
Condensate sensor
In cooling mode it allows the minimum flow temperature control when condensate generation occurs.
Room hygrostat
In cooling mode it allows the minimum flow temperature control according to the room humidity.
Room humidity sensor
(with or without display)
In cooling mode it allows the minimum flow temperature control according to the room dew point, calculated
from the measured room humidity.
Rubber vibration dampers
Allow to reduce the transmission to the unit support plane of the mechanical vibrations generated by the com-
pressor and by the fans in their normal operating mode.
Transformer
230V / 24V - 3VA
It assures the correct power supply for the condensate sensor and for the room humidity sensor.
Domestic hot water
production tank
Integrated tank, to be installed under the unit, for domestic hot water production. Inside the tank a coil for solar
panels integration is contained.
Pipes for solar panels
connection
Allow to move the connections of the solar integration coil, available on the tank (accessory), directly on the
upper side of the unit.
Refrigerant circuit box
If a failure occurs inside the refrigerant circuit, it permits to restart the heat pump very quickly.
10
Содержание HSW 11.1
Страница 47: ...47...
