FERRI T250A right, Руководство по эксплуатации и обслуживанию

Страница: 33 / 140

33
Rev. 1.1
T250A-T320A
TECHNICAL CHARACTERISTICS
03-Descrizione generale della macchina (T250A-T320A)
3 TECHNICAL CHARACTERISTICS
3.1 General description of the machine
Trade name Machine code
T250A right SM25R
T320A right SM32R
T320A left SM32L
T320A r eversi ble LH driving position TR32R
The T model flail hedge mower, was designed, built and protected for use exclusively in the agricultural and road
upkeeping sectors for cutting grass, reeds, bushes and shrubs with a diameter of up to 2 cm (1.18 inches) approx.
During its design and construction, all necessary measures were taken to produce a high-quality, reliable product,
fully compliant with the regulations in force and with particular regard to accident prevention.
The machines to which this manual refers are carried by the tractor by means of a three-point hitch and they act on
the ground depending on their own weight and on the rotation of the flail rotor activated by the power take-off.
These machines are composed of a structure in which the working part is formed by a rotor with a horizontal axis.
Shaped flails which rotate at a faster speed than the moving speed are connected to this rotor.
The machines have a system for adjusting the working height, obtained by means of lateral runners and a rear roller.
The machine is not indicated for use in sectors other than agriculture and road upkeeping.
The machine must be used by one operator.
Any use other than that specified is considered unauthorised and dangerous (improper
use).
WARNING
3.1.1 Proper and improper use of the machine
FOR SAFETY REASONS IT IS STRICTLY FORBIDDEN TO USE THE MACHINE IN
CONDITIONS OTHER THAN THOSE RECOMMENDED.
WARNING
The materials used for construction were selected according to the specific use for which the machine was designed
and manufactured. Improper use can cause damage to persons and/or property and can compromise satisfactory
operation.
Respect for the use, repair and maintenance conditions described in this manual constitutes an essential element of
the intended use of the machine.
The use of the machine for activities not envisaged during its design phase and not listed in this manual shall release
the Manufacturer from all direct or indirect liability.
Any arbitrary modification to the machine shall release the Manufacturer from all liability for damage or injury, however
serious it may be, to operators, third parties and/or property.
Correct use of the machine and scrupulous observance of the provisions contained in this manual and the thorough
application of all precautions in order to prevent dangerous situations, accidents or injuries will extend the machine's
working life, improve performance, and minimise malfunctioning.
FERRI srl declines each and every objective liability deriving from failure to observe the
regulations contained in this manual.
CAUTION