FERRI T250A right, Руководство по эксплуатации и обслуживанию

Страница: 113 / 140

113
Rev. 1.1
T250A-T320A
ROUTINE MAINTENANCE
7.9
07-Messa in parcheggio o deposito (Decespugliatrice) (T380D)
7.12 Parking or storage
Whenever the machine will not be used for a long period of time, take the following measures to keep it in good
condition and free of dust and rust.
► Park the machine on flat and firm ground, in order to prevent the risk of rolling over.
► Remove stabilisers (on the machines equipped with them).
► Lower the support feet and lock them. Close the booms and rest the end tool onto the ground. Position the
machine on the ground using the tractor hydraulic lifting device.
► Remove the machine controls from the tractor cab.
► Disconnect any electric socket from the tractor.
► Thoroughly wash the machine in order to remove all debris, residues, dirt or mud.
► Make a general visual inspection of the machine to identify any structural damage and/or deep abrasions on the
paintwork. Touch up all scratches and dents in the body with paint in order to prevent rust from forming. Replace
and/or repair any damaged parts.
► Check for the integrity and the state of wear of the flails and supports. If worn, replace them.
► Check for the integrity of the accident-prevention guards of the machine. Replace and/or repair any damaged
guards.
► Inspect all hydraulic hoses, couplers and fittings. Tighten any loose fittings. Replace any hose that is damaged,
abraded or cut, or if the fitting crimping is damaged.
► Check that the original safety decals are intact, legible and in their correct positions. Immediately replace any
damaged and/or illegible decals.
► If any lesions, abrasions or damage are found, make the necessary repairs.
► Grease all the mechanical parts, the tightening pins, and the hitch head to the PTO shaft. Make sure that all
grease cavities have been filled with grease in order to remove any residual water left from cleaning the machine.
This operation protects the seal of the bearings.
► Store the machine in an area sheltered from atmospheric agents and far from all possible human activities.
► Store the machine in a flat, dry area.
► Support the frame with the corresponding supports in order to increase the stability of the machine.
► Cover the machine with a tarpaulin, tying it suitably.
► To unhook from the tractor follow the instructions contained in this manual.
Never release used oil into the environment. Oil is classified as special waste and must
be brought to the appropriate collection centres according to the regulations in force.
Contact the nearest Collection centre for used oil.
CAUTION
ONLY LEFT-HAND
VERSION