FERRI T250A right Скачать руководство пользователя страница 18

Страница: 18 / 140

T250A-T320A

Rev. 1.1

SAFETY RULES

02-SICUREZZA

GENERALE

Never allow children or other people to climb on top or operate the tractor or the equipment.

Falls can cause serious injury or death.

DANGER

The user may carry out only maintenance operations that are described in this manual.

WARNING

Make sure that you perform all (routine and extraordinary) maintenance operations on

the tractor (or self-propelled machine) with which the machine will be coupled.

WARNING

►

Do not modify the equipment in any way. Unauthorised modification may impair the functionality and/or safety of

the machine and could affect the life of the equipment. In such a case, the user will be the only party responsible

in case of damage or injury.

Do not tamper with, remove or render inefficient the guards and/or safety devices of the

machine.

DANGER

►

Use exclusively original FERRI spare parts.

FERRI declines all responsibility in case of:

►

Improper use of the machine or use by untrained personnel.

►

Serious shortcomings in the required maintenance.

►

Unauthorised modifications or interventions.

►

Use of non original spare parts or parts not specifically intended for this model.

►

Total or partial failure to observe the instructions.

►

Failure to observe the common rules for safety at work.

Содержание T250A right













































































































































Результаты поиска

Содержание T250A right

Отзывы:

Бренды по названию

Популярные бренды

FERRI T250A right, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание T250A right

Отзывы:

Бренды по названию

Популярные бренды