FERREX BDG 915, Руководство пользователя

Страница: 12 / 22

16
Before starting the equipment/Attachment and operation
VI.Before starting the equipment
Before you connect the equipment to the mains supply make sure that the data on the rating
plate are identical to the mains data.
m
WARNING! Always ensure the machine is switched off and disconnected from the power
supply before making adjustments to the equipment.
• All covers and safety devices have to be properly fitted before the equipment is switched on.
• It must be possible for the sanding belt and disk to run freely.
• When working with wood that has been processed before, watch out for foreign bodies
such as nails or screws, etc.
• Before you actuate the On/Off switch, make sure that the abrasive paper is correctly fitted
and that the equipment‘s moving parts run smoothly.
VII. Attachment and operation
Before starting the equipment
Before you connect the equipment to the mains supply make sure that the data on the rating
plate are identical to the mains data.
m
WARNING!:
Always pull the power plug before making adjustments to the equipment.
• All covers and safety devices have to be properly fitted before the equipment is switched on.
• It must be possible for the grinding/sanding belt and disk to run freely.
• When working with wood that has been processed before, watch out for foreign bodies
such as nails or screws, etc.
• Before you actuate the On/Off switch, make sure that the abrasive paper is correctly fitted
and that the equipment‘s moving parts run smoothly.
Assembling the machine (Fig. 1 - 5)
• Mount the lower wheel guard (15) with the screws (16). (Fig. 2)
• Mount the grinding/sanding table (14) and secure with the screw (1). (Fig. 3+4) The grind-
ing/ sanding table (14) can be infinitely adjusted from 0° to 45° with the miter scale (2) and
the thumb screw (1).
• The adjustable cross stop (13) ensures safe guidance of the workpiece. Important. The
grinding/sanding disk (11) must be able to run freely, but the distance between the grind-
ing/sanding table (14) and the grinding/sanding disk (11) is not allowed to exceed 1.6 mm.
• Put on the stop rail (7) and secure with the allen screw (17). (Fig. 5) Important. The grinding/
sanding belt (6) must be able to run freely.