FERREX BDG 915, Руководство пользователя

Страница: 18 / 22

22
Storage and transport/Electrical connection
XI. Storage and transport
Store the equipment and accessories out of children’s reach in a dark and dry place at above
freezing temperature. The ideal storage temperature is between
5 and 30 °C. Store the electric tool in its original packaging.
m
ATTENTION! The appliance must unconditionally be secured against falling or turning
down during transport.
The machine must only be lifted and transported on its frame or the frame plate.
m
CAUTION! Two person handling required. Weight is 16.5 kg.
XII. Electrical connection
The electrical motor installed is connected and ready for operation. The connection complies
with the applicable European standards. The customer‘s mains connection as well as the ex-
tension cable used must also comply with these regulations.
m
ATTENTION! The power supply cord of this machine has an equipment-grounding con-
ductor and a grounding plug. The plug must be plugged into an appropriate outlet which
is properly installed and grounded in accordance with all local codes and ordinances.
m
WARNING! Check the voltage! The voltage must comply with the information on the
rating label!
The customer‘s mains connection as well as the extension cable used must also comply
with these regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often damaged.
This may have the following causes:
• Passage points, where connection cables are passed through windows or doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due to being driven over.
• Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be used and are life-threatening due to the
insulation damage.Check the electrical connection cables for damage regularly. Make sure that
the power is switched off before inspecting the cable. Electrical connection cables must comply
with the applicable European standards and must be correctly marked. Only use connection
cables with the marking ''H05VV-F''.Replacement cables can only be fitted by an approved and
certified electritian. If you are in any doubt please contact the help line at the foot of this page.