FERREX BDG 915, Руководство пользователя

Страница: 10 / 22

14
General safety instructions for power tools
4) Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or remove the battery pack, if detacha-
ble, from the power tool before making any adjustments, changing accessories, or sto-
ring power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools and accessories. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool’s ope-
ration. If damaged, have the power tool repaired before use. Many accidents are cau-
sed by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery han-
dles and grasping surfaces do not allow for safe handling and control of the tool in unexpected
situations.
5) Service
a. Have your power tool serviced by a qualified repair person using only identical replace-
ment parts. This will ensure that the safety of the power tool is maintained.
m
WARNING! This electric tool generates an electromagnetic field during operation. This field
can impair active or passive medical implants under certain conditions. In order to prevent
the risk of serious or deadly injuries, we recommend that persons with medical implants con-
sult with their physician and the manufacturer of the medical implant prior to operating the
electric tool.
Additional safety rules for the belt and disc sanding machine
m
WARNING! Do not use your machine until it is completely assembled and installed according to
the instructions.
• Attention: This machine has only been designed for sanding wood or similar materials. The
sanding of other materials can cause fire, injuries, or damage the product.
• Always wear safety goggles.
• This machine may only be operated indoors.
• Important: Mount and use the machine on a horizontal surface. A non-horizontal surface
can damage the motor.