FERREX BDG 915, Руководство пользователя

Страница: 20 / 22

24
Troubleshooting
XIV. Troubleshooting
Problem Possible Cause Action
Motor doesn’t
start
a) ON/OFF switch damaged.
b) power cord damaged.
c) switch relay damaged.
d) Fuse blown.
e) Motor burnt.
a-d) Replace all damaged parts
before you use your machine
again.
e) Contact your local service centre.
Every attempt to carry out a re-
pair, can be dangerous if it is not
done by skilled personnel.
Machine gets
slower during
work. Too much pressure put on the
workpiece. Reduce the pressure on the work-
piece.
Sanding belt
comes off the
drive pulleys.
Belt does not run straight. Reset the track.
The wood gets
burnt during
sanding. a) Sanding disc or belt covered with
grease.
b) Excessive pressure on workpiece.
a) Replace disc or belt.
b) Reduce pressure on workpiece.