FERREX 808470, Руководство пользователя

Страница: 13 / 36

MODEL No.: PRG101, PRODUCT No.: 808470
• All hoses, fittings, and filter caps must be secured before operating spray
pump. Unsecured parts may eject at great force or leak a high pressure fluid
stream causing severe injury.
• All hoses, swivels, guns, and accessories must be pressure rated at or above
3000 PSI/ 20.68Mpa.
• Do not spray outdoors on windy days.
• Wear clothing to keep paint off skin and hair.
• Do not operate or spray near children. Keep children away from the
equipment at all times.
• Do not overreach or stand on an unstable support. Keep effective footing
and balance at all times.
• Stay alert and watch what you are doing.
• Do not operate the unit when fatigued or under the influence of drugs or
alcohol.
6. IMPORTANT ELECTRICAL INFORMATION
NOTICE
This machine is provided with a non-resettable thermal overload.
• Always disconnect the motor from the power supply before working on the
equipment.
The cause of the overload should be corrected before restarting. Take unit
to Service Center.
The plug must be plugged into an outlet that is properly installed.
This product is for use on a nominal 220 volt. Make sure that the product is
connected to an outlet having the same configuration as the plug.
No adapter should be used with this product.
10