FERREX 808470, Руководство пользователя

Страница: 11 / 36

MODEL No.: PRG101, PRODUCT No.: 808470
PREVENTION:
• Use a respirator or mask if vapors can be inhaled. Read all instructions
supplied with the mask to be sure it will provide the necessary protection.
• Wear protective eyewear.
• Wear protective clothing as required by coating manufacturer.
HAZARD: EXPLOSION OR FIRE
Solvent and paint fumes can explode or ignite. Property damage and/ or severe
injury can occur.
PREVENTION:
• Provide extensive exhaust and fresh air introduction to keep the air within
the spray area free from accumulation of flammable vapors. Solvent and
paint fumes can explode or ignite.
• Do not spray in a confined area.
• Avoid all ignition sources such as static electric sparks, open flames, pilot
lights, electrical appliances, and hot objects. Connecting or disconnecting
power cords or working light switches can make sparks. Paint or solvent
flowing through the equipment is able to result in static electricity.
• Do not smoke in spray area.
• Fire extinguisher must be present and in good working order. For example,
foam fire extinguisher.
• Place paint pump at least 20 feet from the spray object in a well-ventilated
area (add more hose if necessary). Flammable vapors are often heavier than
air. Floor area must be extremely well ventilated.
• The equipment and objects in and around the spray area must be properly
grounded to prevent static sparks.
• Keep area clean and free of paint or solvent containers, rags and other
flammable materials.
• Use only conductive or grounded high pressure fluid hose. Gun must be
grounded through hose connections.
• Power cord must be connected to a grounded circuit.
• Always flush unit into a separate metal container, at low pump pressure,
with spray tip removed. Hold gun firmly against side of container to ground
container and prevent static sparks.
8