background image

54

Maintenance of the seat belts and 

pretensioners 

•  Following a collision of a certain severity, 

replace the seat belts that were worn at 

the time, even if they may not appear to 

be damaged.

• Periodically check that the screws on the 

anchoring points are tight and that the 

belt is intact and slides smoothly.

• The belt must be kept clean; any dirt on 

the belt could jeopardise the effi ciency of 

the belt retractor. 

•  To clean the seat belt, wash it by hand 

with mild soap and water and let it dry. 

Do not use strong detergents, bleach or 

aggressive solvents, as they can weaken 

the fi bres.

  Do not let the belt retractors get wet: 

proper functioning is ensured only if they 

are kept dry. 

•  The pretensioner requires no 

maintenance or lubrication. 

If immersed in water or mud, the 

pretensioners must be replaced.
• The pretensioner must be replaced at 

the intervals specifi ed in the “Warranty 

Booklet and Maintenance Schedule”.

All work on any part of the safety 

system components must be carried 

out by the 

Ferrari Service Network

.

 It is not permitted to remove or make 

modifi cations of any kind to the seat belts, belt 

retractors and pretensioners.

Pretensioners 

The pretensioners are activated in the event 

of severe head-on collisions. The belt will 

rewind a few centimetres just before the 

restraining action begins, thereby ensuring 

the proper fi tting across the body. 
Activation of the pretensioners is indicated 

by a warning light on the instrument panel 

and by the seat belt locking. 

After activation, the pretensioners no 

longer function and they cannot be 

repaired under any circumstances. Contact 

the 

Ferrari Service Network 

to have 

them replaced. 

When the pretensioners are activated, a 

small amount of smoke is released. This 

smoke is not harmful and does not indicate 

the presence of a fi re. 

 Maintenance work involving strong impacts, 

vibrations or heating of the pretensioner area 

may activate them. Vibrations caused by road 

bumps will not have this effect.

Child safety

Because of their size, children are at greater 

risk than adults. Suitable restraint or safety 

systems must be used.
All minors whose physical characteristics 

(i.e. height, weight) fall within the legal 

limits in force in each country must be 

protected by approved restraint or safety 

systems (e.g., child seats, cradles, cushions).
In any case, you are advised to always 

use homologated child restraint systems 

bearing the proper test marking.
Always adjust the seat to the most rearward 

position, in order to ensure that the child is 

as far away as possible from the dashboard 

structure. 

Incorrect fastening of a child 

restraint system increases the risk of 

injury to the child in the event of a collision.

Содержание F430 SPIDER



















































































































































Отзывы: