Ferrari F430 SPIDER Скачать руководство пользователя

Страница: 94 / 146

Replacing the wheels

If one or more wheels need to be

replaced, proceed as follows:

- Replace the stud bolts with damaged

thread or cone.

- Carefully clean the stud bolts before

fi tting.

- Absolutely do not lubricate the contact

surfaces between the stud bolt and the

wheel rim and between the wheel rim

and the brake disk.

In order not to remove the anti-lock

treatment, do not clean the wheel rim cones

with solvents or aggressive products.

Spare wheel (optional)

On request, the vehicle can be equipped

with a kit containing:
• Spare wheel

with smaller tyre. The

label

on the spare wheel indicates the

maximum permitted speed of 80 km/h.

• Additional toolkit

containing: jack and

wrench to fasten the wheel stud bolts.

�

Warning

• Always keep the spare wheel in perfect

working order,

periodically checking that

the infl ation pressure is 4.2 bar.

• It must only be used for short trips, in

emergencies.

• When the spare wheel is fi tted, never

exceed the maximum speed of 80 km/h

and drive carefully, especially around

bends and when overtaking, avoiding

accelerating or braking suddenly.

• Do not exceed the approved weight

limits.

• Do not fi t snow chains on the spare

wheel.

• Never fi t more than one spare wheel at

a time.

Failure to comply with these instructions

could lead to loss of control of the vehicle

and consequently damage to the vehicle and

injuries to the occupants.

On vehicles equipped with tyre pressure

monitoring system, turn off the engine when

you have a puncture. Start it again only

after having fi tted the spare wheel in order

to prevent the system from thinking that the

spare wheel is a malfunction.

Содержание F430 SPIDER



















































































































































Результаты поиска

Содержание F430 SPIDER

Отзывы:

Похожие инструкции для F430 SPIDER

Бренды по названию

Популярные бренды

Ferrari F430 SPIDER, Руководство пользователя

Результаты поиска

Содержание F430 SPIDER

Отзывы:

Похожие инструкции для F430 SPIDER

Бренды по названию

Популярные бренды