Ferrari F430 SPIDER Скачать руководство пользователя

Страница: 80 / 146

• If a

DOWN

shift is requested in order to

start overtaking where rapid acceleration

is required, push the accelerator pedal

just before moving the lever.

• Wait until one gearshift has been

completed before requesting the next

one, thereby avoiding multiple requests

in rapid succession.

RPM adjustment during gearshifting

Under racing-style driving conditions

(engine over 3000 RPM), the RPM rate is

adjusted automatically during gearshifting.

This is even more apparent as engine speed

increases.

“N” (Neutral) request

If necessary,

can be requested at any

speed.
Subsequently, if

shifting is requested,

the system will engage the gear most suited

to the speed of the vehicle.

Stopping the vehicle

When the vehicle stops, the system

automatically engages

1st

gear (unless

has been requested before).
With the vehicle stopped and the engine

running, hold the brake pedal down until

you are ready to start off again.

Turning off the engine and the system

The engine can be turned off either with

the gearshift in

or a gear engaged.

After turning the ignition key from position

to position

, the display will remain on

for a few more seconds to display the gear

engaged. If the gearshift is in

, a buzzer

will sound.

Do not start the vehicle before the

display has turned off.

Never leave the vehicle with the gearshift

but engage a gear (

1st

), check

that the display does not fl ash and always

engage the handbrake. Never leave the

vehicle with the engine running.
Do not remove the key when the vehicle

is moving! The system and the display will

remain active, but malfunctioning, until

the vehicle stops. In addition, the steering

wheel will lock automatically with the fi rst

rotation of the steering wheel.

In this case, the failure warning light

will illuminate, (

see page 33

) and before

starting off again, the system and the

display must be turned off and the “Start-

up” procedure repeated.
In any event, it is advisable to:
• Turn off the engine and the system

holding the brake pedal pushed down.

• Not request a gearshift while the system

is turning off.

Other system functions

“Automatic gearshift” mode

This mode is activated by pressing the

AUTO

button on the central console.

Activation is signalled by the word

AUTO

appearing on the gear display, on the

instrument panel.

The system will automatically shift the gears

and

DOWN

according to the vehicle

speed, the engine RPM and the torque/

Содержание F430 SPIDER



















































































































































Результаты поиска

Содержание F430 SPIDER

Отзывы:

Похожие инструкции для F430 SPIDER

Бренды по названию

Популярные бренды

Ferrari F430 SPIDER, Руководство пользователя

Результаты поиска

Содержание F430 SPIDER

Отзывы:

Похожие инструкции для F430 SPIDER

Бренды по названию

Популярные бренды