Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 85

Страница: 85 / 266

About your Vehicle

Power windows

The power windows can only be used with the ignition key in

position

Driver-side power window

Use button

to move the driver-side window up or down.

Press or push button

quickly to activate manual operation (partial

opening/closing): when the button is released, the window stops at

the position reached.
If the button is pressed/pushed at length (over 0.3 seconds),

automatic window operation (complete opening/closing) is

activated. The window will only stop when it reaches the end of its

travel or by pressing/pushing the button again.

Passenger-side power window

Use button

to move the passenger side window up or down.

Only manual operation is possible (partial opening) to raise the

window: when button

is released, the window stops at the

position reached.
To lower the window, automatic operation is also possible (full

opening): if the button is pressed at length (over 0.3 seconds)

automatic window operation is activated. The window will only

stop when it reaches the end of its travel or by pressing the button

again.

Warning

Improper use of the power windows can be dangerous. Before

use, always check that people and objects are at a safe distance.
Pay particular attention during the automatic operation of the

driver-side power window.
To protect the passengers remaining in the car against accidental

activation of the power windows, always remove the key from

the ignition.

Содержание 2012 F12 Berlinetta











































































































































































































































































Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды

Ferrari 2012 F12 Berlinetta, Руководство пользователя

Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды