Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 221

Страница: 221 / 266

221

Advice for Emergency Situations

Warning

When the battery is connected and charged, this operation is

automatically performed when the doors are opened and closed.

The windows must remain lowered until the charged battery is

reconnected. If the battery is discharged and the windows are

fully up, only open the doors when strictly necessary and take

great care; do not close them again until the windows can be

lowered.

Important note

We recommend using the battery conditioner if the vehicle is

going to left unused for a long period.

To cut off the power supply from the battery to the electrical

system, use the quick release

on the left side of the battery. Use

the locking lever to loosen the terminal.

Detach the terminal from the battery: the power supply from the

battery to the electrical system is cut off.

Warning

The battery quick release must only be used if the battery

conditioner cannot be connected.

Warning

Place the clamp so that it does not come into contact with the

battery terminal or other metal parts of the vehicle.

Reconnecting the battery

Place the clamp on the battery and fasten it by closing the locking

lever.

Each time the battery is reconnected, do the following before

starting the engine:

- close both doors and close the luggage compartment lid; unlock

and lock the doors using the remote control; open the luggage

compartment lid using the remote control;

- adjust the clock (date and time on instrument panel);

- close both doors and fully raise the driver side and passenger side

windows to their upper limit; check that the windows move down

to the “target position” when the doors are opened.

Содержание 2012 F12 Berlinetta











































































































































































































































































Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды

Ferrari 2012 F12 Berlinetta, Руководство пользователя

Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды