Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 175

Страница: 175 / 266

175

About your Vehicle

If the engine is turned off with the front suspension lift activated,

the following message appears on the left TFT display at key-off:

“LIFT ON. Set LIFT to OFF”. Turn the key back to position

(key-

on) and press button

to lower the vehicle. If it is not manually

deactivated by pressing the button, within 15 seconds of turning off

the engine, the system is automatically deactivated.

Warning

The system has not been designed to remain activated when

the engine is turned off and the vehicle is stationary. If the

engine is turned off with the front lift activated, the vehicle is

automatically lowered after 15 seconds.
Do not use the front suspension lift to park the vehicle on

obstacles (e.g. pavements); these obstacles may come into

contact with the front of the vehicle and damage it once the

system has been deactivated.

In the event of engine failure, the “LIFT” system can however be

activated by pressing button

for 10 seconds. In this way, the

vehicle front can be lifted even in emergencies when the engine is

turned off (for example, to load it onto the ramp of a breakdown

vehicle).

Important note

The front suspension lift should only be used for the purposes

described above and not to drive over speed control systems

(e.g. traffic calmers) more quickly.

LIFT

Содержание 2012 F12 Berlinetta











































































































































































































































































Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды

Ferrari 2012 F12 Berlinetta, Руководство пользователя

Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды