manualshive.com logo in svg

Ferrari 2012 F12 Berlinetta, Руководство пользователя

Поделиться
Скачать
Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 158

158

About your Vehicle

CT OFF mode

In “CT OFF” mode the F1-Trac traction control is disabled. This 

mode further enhances the already racing -style behaviour of the 

vehicle: traction control is disabled while stability control remains 

active when a certain level of sideslip is exceeded. The gearshift 

mode, suspension damping and the performance ABS setting are 

the same as the previous position. The electronic differential has a 

specific setting developed to emphasise the dynamic qualities of the 

vehicle. Stability is not ensured.
This mode is used on the race track in high grip conditions.
If “CT OFF” mode is selected, this is indicated on the left TFT 

display as shown below:

ESC OFF mode

In “ESC OFF” mode the ESC system is disabled. No electronic 

systems other than the E-Diff control vehicle stability and the 

driver is allowed complete freedom and control of the vehicle 

for track use. This mode is used on the race track in high grip 

conditions. The gearshift mode, suspension damping and the 

performance ABS setting are the same as the “RACE” and “CT 

OFF” modes.

Warning 

The vehicle, which has been designed and produced for road 

use, should only be used occasionally on race tracks.

Warning 

In low- to medium-grip conditions (e.g. wet, icy, sandy roads), 

activate the 

WET

 driving mode and do not deactivate the 

ESC

.

Important note 

When “ESC OFF” mode is selected, the Manettino lever 

automatically goes back to “CT OFF” mode: this occurs because 

each time the engine is started, the ESC system is reactivated.

Содержание 2012 F12 Berlinetta











































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды