Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 133

Страница: 133 / 266

133

About your Vehicle

Driving modes that can be selected with “Manettino”

WET mode

This is the maximum safety driving mode. Recommended in low

grip conditions.

SPORT mode

This is the ideal setting for vehicle performance recommended for

everyday driving in medium- to high-grip conditions.

RACE mode

This mode offers maximum performance and stability in high grip

conditions and is particularly suitable when using the vehicle on

track.

Warning

The vehicle, which has been designed and produced for road

use, should only be used occasionally on race tracks.

CT OFF mode

When this mode is selected, the F1-Trac traction control system is

disabled whereas stability control remains active. This mode is used

on the race track in high grip conditions.

ESC OFF mode

This mode allows the driver complete freedom and control of the

vehicle for track use in high-grip conditions.
No electronic system other than the E-Diff controls vehicle stability.

Warning

In low- to medium-grip conditions (e.g. wet, icy, sandy roads),

activate the

WET

driving mode and do not deactivate the

ESC

Important note

For further information on the driving modes that can be

selected, refer to the paragraph “Driving using the driving mode

control switch” on page 156.

Содержание 2012 F12 Berlinetta











































































































































































































































































Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды

Ferrari 2012 F12 Berlinetta, Руководство пользователя

Результаты поиска

Содержание 2012 F12 Berlinetta

Отзывы:

Бренды по названию

Популярные бренды