Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 266

Ferrari 2012 F12 Berlinetta Скачать руководство пользователя страница 41

41

Safety

2

Warning

Seat belts must be worn at all times and must be properly

fastened and adjusted!

Warning

For an effective restraining action, the seat belt must be fastened

correctly with the seat backrest in the upright position.
The seat belt is fastened correctly when the upper part of the

belt crosses the centre of the shoulder (not the neck) and the

abdominal section is fitted over the hips (not the abdomen).
Make sure that the belt is not twisted and that it passes closely

over your body; if not, in the event of a head-on collision, it may

move and cause injury to the abdomen.
Avoid wearing bulky clothing that may interfere with the proper

operation of the seat belts.

Warning

Each seat belt has been designed to protect only one occupant.

If more than one person uses the same seat belt, the risk of

injury in the event of an accident is increased.
Do not sit babies, small children or other persons on your lap.
If there is a collision, the weight of an adult may cause the

child to be crushed by the seat belt causing severe or even fatal

injuries.

«
...
39
40
41
42
43
...
»

Содержание 2012 F12 Berlinetta











































































































































































































































































Отзывы:

Нет отзывов