14
© Ferno-Washington, Inc. 234-2117-01 May 2003
Ultra Care 4000
™
5.8 Instant Boom Stop
The lift boom is designed with a stop-movement safety
feature that automatically stops the travel of the lift
boom when an obstruction is encountered.
To restore normal function, remove the obstruction.
5.7 Handheld Control
Use the handheld control (Figure 16) to raise and lower
the lift boom. To use the control:
1. Hold the control with the directional arrows
toward the top of the control (Figure 16).
2. To raise the boom, press and hold the up-arrow
button until the boom reaches the desired height.
3. To lower the boom, press and hold the down-arrow
button until the boom reaches the desired height.
Hang the control on the pushbar when not in use
(Figure 17).
If the lift does not respond to the handheld control:
•
Verify that the control is plugged in to the actuator;
•
Make sure the battery is connected to the control
box (See page 18);
•
Charge the lift if needed;
•
Contact EMSAR for parts or service (page 21).
Using the Lift
Figure 17 - Storing the Handheld Control
on the Pushbar
Figure 16 - Using the Handheld Control
Up
Button
Down
Button