Page 37
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
e13) Call forward
There is the option to connect the call forward to another residence, in order to be able to
attend to the call from another location.
It must be pre-enabled by the installer and
selected by the user
. The call is received in both monitors and the first to answer does
not allow the other to intercept the communication. The monitor being forwarded to
displays an icon on the screen indicating that the call is a forwarded call.
Explained in detail in option:
-
a.3) Programming a call forward. Option 1: from the Monitor.
-
a.4) Programming a call forward. Option 2: from Panel + Monitor
-
Enable Call forward.
-
Select Call forward.
f) Parameters
The installer may enable determined parameters that are not enabled by default.
1.
Once the installer accesses the
administrator menu screen,
select the
parameters option with the cursors (white
line under the icon) and press
. The
following screen will appear.
2.
By default the following option is activated:
f2) Display call origin.
With the cursors we select the
corresponding icon (white line under the
icon).
Press
, to select the selected mode. On
the selected mode you will see a
. In order
to remove the selection also press
.
f1
f2
f3
f4
f5
e11) Messages - e12) Automatisation- e13) Alarms
These options are not available in the basic model.
When you press the relevant button from the
monitor: Lift Control, the corresponding
command is transmitted by the bus, and it
appears on the monitor.
