Fermax SMILE 3.5" Monitor, Инструкция по установке и эксплуатации

Страница: 22 / 55

Page 22
SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS
1. In order to enable the call forward option,
go to the corresponding icon with the
cursors.
x x x x M
2. Pressing

, select the desired access
mode, in this case the menu M has been
selected. The selected option is displayed
with the white line blinking under the icon.
x x x x M
M
x x x x M
M
3. Pressing

, select the desired access
mode, in the selected option. Activation is
confirmed since the white line stops blinking
and remains constant.
4. Press

, to exit to the previous menu.
Continue pressing

until you reach the
desired menu or you exit programming.
Select call forward.
With the monitor in standby, Press "Menu" for 3 seconds. , you access the configuration
menu, the screen options appear, (use the cursors to move them). On the second screen
you see that the call forward function is enabled by the menu.
Notes:
- For this function to be saved on the monitor, you must exit the menu. With the monitor
in standby, this option is then saved. All capacitive buttons are lit sequentially.
Whenall
capacitive buttons have been lit, this option is saved.