Page 30
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
Just as previously stated, we exit the do not disturb mode:
- When the programmed time has passed.
- by pressing the shortcut button or
- by selecting the do not disturb icon on the menu.
Notice:
-
We can configure the call extension, light and ringtone activator...etc, for this to be
enabled in this mode when the monitor receives a call. For this we must activate within
the Parameters in Activate auxiliary devices, see the corresponding chapter
f) Parameters.
e3) Calling a guard unit
In installations with a Guard unit, we can
make a call to this via the lock-release
button
(default configuration), when
the monitor is in standby. When we make
a call and it is confirmed by the Guard unit,
an image is activated indicating that the
call is in process.
If after 15’’ there is no response from the
Guard Unit, the monitor will show a
message indicating that the Guard Unit is
busy, that it has registered the call and it
will answer it.
Notice:
- You can assign a different button for the Guard Unit: shortcut button,
wildcard button
or access via the menu icon. If you have programmed the shortcut or wildcard
button, the LOCK RELEASE button, it will never call the Guard Unit.
e2) Images
This function is not available in the basic model.
