Fermax SMILE 3.5" Monitor, Инструкция по установке и эксплуатации

Страница: 19 / 55

Page 19
SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS
0 2 8
_ _ _
2222
4444
a.1) Programming the monitor from the
monitor itself.
Explained in previous pages, see
"Programming the smile monitor", option
1.
a.2) Programming the monitor from the panel.
Explained in previous pages, see
"Programming the smile monitor," option 2.
Call forward.
There is the option to configure the call forward to another residence, in order to be able to
attend to the call from another location.
It must be pre-enabled by the installer and selected
by the user . The call is received in both monitors and the first to answer does not allow the
other to intercept the communication. The monitor being forwarded to displays an icon on
the screen indicating that the call is a forwarded call.
a.3) Programming a call forward. Option 1: from the Monitor.
1. Select the programming option from the
monitor VDS (2) . The selected option is
displayed with the white line under the
icon.
The first thing the monitor then does is
indicate the number of the current monitor
on the SCREEN. If it is not programmed, it
will show the following:
- - -
2. Program the call number: Press

on the
previous screen and access the screen
to program the residence´s number.
The first number is blinking, each time you
press + or - it increases or decreases this
number.
When the corresponding number has
been programmed you reach the previous
menu via the back arrow.
0 2 8
_ _ _
2222
4444
0 0 1
- : Decrease button selected with the cursor.
+ : Increase button selected with the cursor.

: This moves to the following digit.

: It restarts with the first digit.
a5
a2
a1
a3 a4
a6