Ferm
59
UK
D
NL
F
E
P
I
S
SF
N
DK
06
Ferm
Electrical safety
•
Do not use extension cables which are too long. Use extension cables with a core diameter
of 1,5 mm
2
minimal and only when the cable is rolled out completely.
•
Keep the mains cable away from moving parts of the machine.
•
Throw away old cables or plugs when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in the wall outlet.
Warning: Prior to mounting an accessory always unplug the tool.
Changing a bit
Fig. 2
The bits can easily be placed directly into the bit holder.
Two options to reach the bit:
1.
Rotate the adjustment collar clockwise to minimum screwing depth, so the bit comes out of
the machine. See also description “Depth stop”.
2.
Remove the adjustment collar by rotating it counterclockwise until the collar comes free
and can be removed. The bit is now easily reachable and can be replaced.
The On/Off switch
Fig. 4
Switch the machine on by pressing the triggerswitch (3). When you release the triggerswitch (3)
the machine will turn off.
Switch-lock
You can lock the On/Off switch by pressing the triggerswitch (3) and then pressing knob (4).
Release the switch-lock by pressing the triggerswitch (3) shortly.
Switching the direction of rotation
•
Direction of rotation counter-clockwise: shift switch (5) to “L”
•
Direction of rotation clockwise: shift switch (5) to “R”.
Depth stop
Fig. 3
With the adjustment collar the screwing depth of the screw head in the material can be
preselected in several steps.
•
Slide the adjustment collar in forward direction and set the screwing depth by rotating the
adjustment collar.
•
Rotating the adjustment collar clockwise will increase the screwing depth.
•
Rotating the adjustment collar counterclockwise will decrease the screwing depth.
4. USE
3. ASSEMBLY
GB
D
NL
F
E
P
I
S
SF
N
DK
