background image

8

2.1 LEGAL WARRANTY

In order to be able to enjoy the legal warranty in accordance with EEC Directive 1994/44EC, a user must fully comply 

with all of the instructions contained in this manual, and especially:

• 

Must always act within the limits of use of the heater.

• 

Must always perform ongoing and thorough maintenance.

• 

Must authorise the use of the heater only to persons of proven capacity, attitude, and who are properly trained for 

such a task.

The manufacturer accepts no responsibility, legal or penal, directly or indirectly, for:

• 

An installation that is not in full compliance with the regulations in force in the country as well as safety directives.

• 

Non-compliance on the part of unqualified and/or untrained personnel.

• 

Usage not in compliance with safety directives.

• 

Modifications and repairs not authorised by the Manufacturer and made to the unit.

• 

Use of spare parts that are not original or are not specified for that specific model of heater.

• 

Insufficient maintenance.

• 

Exceptional circumstances.

2.2 TECHNICAL ASSISTANCE

FERLUX is capable or providing a solution to any technical problem regarding the use and maintenance of the unit at any 

point during its operational life.

2.3 SPARE PARTS

Only use original spare parts.

Do not wait for parts to be damaged before proceeding to replace them. Replacing a worn component before it breaks helps 

prevent accidents caused by the sudden breaking of these components, which could cause harm to people or objects.

                                                                                

¡¡¡ATENTION!!!

THE  INSTALLATION  MUST  BE  CARRIED  OUT  BY  AN  AUTHORISED  PERSON  WHO  MUST  PROVIDE 

THE PURCHASER WITH A DECLARATION OF CONFORMITY FOR THE INSTALLATION IN WHICH THEY 

ACCEPT FULL RESPONSIBILITY FOR THE FINAL INSTALLATION AND, CONSEQUENTLY, THE PROPER 

OPERATION OF THE INSTALLED UNIT. FERLUX SHALL NOT BEAR ANY RESPONSIBILITY IN THE EVENT 

THAT THESE PRECAUTIONS ARE SHOWN TO HAVE NOT BEEN MET.

Содержание AROA 10

















































Отзывы: