Appendix B - Specifications
-
Hardware Connection
Note: Before you start the hardware connection, you are advised to find an appropriate
location to place the Access Point. Usually, the best place for an Access Point is at the center
of your wireless network, with line of sigh to all wireless stations. Also, the higher the antenna
is placed, the better the device can perform.
1.
Connect to your local area network:
connect a
Ethernet cable
to one of the
Ethernet
port (LAN1~LAN5) of this wireless Access Point, and the other end to a hub, switch,
router, or another wireless access point.
2.
Power on the device
: connect the included AC power adapter to the wireless Access
Point’s power port and the other end to a wall outlet.
3.
Configure your PC:
Make sure your local PC(s) has wireless network adapter(s)
installed.
