associate with the AP.
Deny Listed
: Stations shown in the table won’t be able to
associate with the AP.
MAC Address:
Enter the MAC Address of a station that is
allowed to access this Access Point.
Comment:
You may enter up to 20 characters as a remark to the
previous MAC Address.
Apply Changes:
Press to save the new settings on the screen.
Reset:
Press to discard the data you have entered since last time
you press Apply Change.
Delete Selected:
To delete clients from access to this Access
Point, you may firstly check the
Select
checkbox next to the MAC
address and Comments, and press
Delete Selected
.
Delete All:
To delete all the clients from access to this Access
Point, just press
Delete All
without selecting the checkbox.
Reset:
If you have made any selection, press
Reset
will clear all
the select mark.
WDS Control
Device Comment: You may enter up to 20 characters as a remark
to the previous MAC Address.
Device MAC: Enter the MAC Address of a station that is allowed
to access this Access Point.
Add: Click to add the MAC address into the WDS Device MAC
List.
Remove: Click the Remove button after selecting the item you
want to delete.
Cancel: Click to abort selecting.
Reset
Click to clear and reset the current settings.
