Encryption
: Select he encryption type from the pull-down menu,
including None, WEP64 bits, WPA (TKIP) and WPA (AES).
WEP Key Format
: Select
HEX
if you are using hexadecimal
numbers (
0-9, or A-F
). Select
ASCII
if you are using ASCII
characters (
case-sensitive
).
Ten hexadecimal digits
or
five ASCII characters
are needed if
64-bit WEP
is used;
26 hexadecimal digits
or
13 ASCII
characters
are needed if
128-bit WEP
is used.
WEP Key
: Enter the WEP key in this column
Pre-Shared Key Format
: Select the Pre-Shared Key from the
pull-down menu
Pre-Shared Key
: Pre-Shared-Key serves as a password. Users
may key in 8 to 63 characters a string to set the password or leave
it blank, in which the 802.1x Authentication will be activated.
Make sure the same password is used on client's end.
There are two formats for choice to set the Pre-shared key, i.e.
Passphrase
and
Hex
. If
Hex
is selected, users will have to enter a
64 characters string. For easier configuration, the
Passphrase
(at
least 8 characters) format is recommended.
Apply Changes
: Click to save and apply the current settings.
Close
: Click to close this configuration window.
Reset
: Click to clear and reset the current settings.
WDS Control
