from the pull-down menu.
•
Disable
: Select to disable Wireless Access Control Mode.
•
Allow Listed
: Only the stations shown in the table can
associate with the AP.
Deny Listed
: Stations shown in the table won’t be able to
associate with the AP.
MAC Address:
Enter the MAC Address of a station that is
allowed to access this Access Point.
Comment:
You may enter up to 20 characters as a remark to the
previous MAC Address.
Apply Changes:
Press to save the new settings on the screen.
Reset:
Press to discard the data you have entered since last time
you press Apply Change.
Delete Selected:
To delete clients from access to this Access
Point, you may firstly check the
Select
checkbox next to the MAC
address and Comments, and press
Delete Selected
.
Delete All:
To delete all the clients from access to this Access
Point, just press
Delete All
without selecting the checkbox.
Reset:
If you have made any selection, press
Reset
will clear all
the select mark.
Apply Changes
Click to save the current settings.
Reset
Click to reset this page.
U
Client Mode
