EPC1800 SERIES OPERATION MANUAL
●
If this command is not received at the beginning of a line, and the character font is to
be changed, all previous data in the print buffer is printed and the ticket is placed at
the beginning of the next line.
[Default]
n
= <00>H
[Reference]
ESC M, ESC E, ESC G, GS !
ESC
-
n
[Name]
Turns on/off underline mode
[Format]
ASCII
ESC
-
n
Hex
1B
2D
n
Decimal
27
45
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Sets the underline mode. Only the least significant two bits are valid for
n
:
n
= <00>H / <30>H : Underline mode is turned off.
n
= <01>H / <31>H: Set the underline thickness to 1-dot.
n
= <02>H / <32>H: Set the underline thickness to 2-dots.
[Notes]
ESC ! command can turns off the underline mode.
[Default]
n
= <00>H
[Reference]
ESC !
ESC
2
[Name]
Select default line spacing
[Format]
ASCII
ESC
2
Hex
1B
32
Decimal
27
50
[Description]
Selects 3.75 mm (30 x 0.125 mm) line spacing.
[Reference]
ESC 3
ESC
3
n
[Name]
Set line spacing
[Format]
ASCII
ESC
3
n
Hex
1B
33
n
Decimal
27
51
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Sets the line spacing to [
n
x 0.125 mm].
[Default]
n
= <1E>H
[Reference]
ESC 2
ESC
@
[Name]
Initialize printer
[Format]
ASCII
ESC
@
Hex
1B
40
Decimal
27
64
[Description]
Clears the data in the print buffer and resets the printer settings to the settings that were
in effect when the power was turned on.
[Notes]
●
The data in the receiver buffer is not cleared.
●
This command does not involve a hardware reset.
ESC
E
n
[Name]
Turn emphasized mode on/off
[Format]
ASCII
ESC
E
n
Hex
1B
45
n
Decimal
27
69
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Turns emphasized mode on or off
When the LSB of
n
is 0, emphasized mode is turned off.
When the LSB of
n
is 1, emphasized mode is turned on.
[Notes]
●
Only the least significant bit of
n
is enabled.
●
This command and
ESC !
turns on and off emphasized mode in the same way. Be
careful when this command is used with
ESC !
.
27 of 53
