Fenix EPC1800, Руководство по эксплуатации

Страница: 39 / 53

EPC1800 SERIES OPERATION MANUAL
●
d indicates the bit-image data. Setting a bit to 1 prints a dot and setting it to 0 does
not print a dot.
[Example] When xL + xH x 256 = 64
GS w n
[Name] Set bar code width
[Format] ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
[Range] <02>H
≤
n
≤
<06>H
[Description] Sets the horizontal size of the bar code.
n specifies the bar code width as follows:
n
Module Width (mm) for
Multi-level Bar Code
Binary-level Bar Code
Thin element
width (mm)
Thick element
width (mm)
<02>H 0.282 0.282 0.706
<03>H 0.423 0.426 1.129
<04>H 0.564 0.564 1.411
<05>H 0.706 0.706 1.834
<06>H 0.847 0.847 2.258
Multi-level bar codes are JAN 13(EAN13), CODE 128.
Binary-level bar codes are ITF, CODE39.
[Default] n = <03>H
[Reference] GS k
FS p n m
[Name] Print NV bit image
[Format] ASCII FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
[Range] <01>H
≤
n
≤
number of saved logo
<30>H
≤
m
≤
<33>H
[Description] Prints a NV bit image n using the mode specified by m .
m Mode
Vertical
Dot Density
Horizontal
Dot Density
<30>H Normal 203.2 dpi 203.2 dpi
<31>H Double-width 203.2 dpi 101.6 dpi
<32>H Double-height 101.6 dpi 203.2 dpi
<33>H Quadruple 101.6 dpi 101.6 dpi
[dpi: dots per 25.4 mm]
n is the number of the NV bit image (always 1).
m specifies the bit image mode.
[Notes]
●
NV bit image means a bit image which is defined in a non-volatile memory by FS q
and printed by FS p .
●
This command is not effective when the specified NV bit image has not been defined.
● This command is effective only when there is no data in the print buffer.
●
This command is not affected by print modes (emphasized, double-strike, underline,
character size, white/black reverse printing, etc.).
●
If the printing area width set by GS L for the NV bit image is less than one vertical
line, the following processing is performed only on the line in question. However, in
NV bit image mode, one vertical line means 1 dot in normal mode (
m =30H) and in
39 of 53