Fenix EPC1800, Руководство по эксплуатации

Страница: 32 / 53

EPC1800 SERIES OPERATION MANUAL
(
H
E
IG
H
T
)
x 3 02 12 22 32 42 52 62 72
x 4 03 13 23 33 43 53 63 73
x 5 04 14 24 34 44 54 64 74
x 6 05 15 25 35 45 55 65 75
x 7 06 16 26 36 46 56 66 76
x 8 07 17 27 37 47 57 67 77
[Notes] ● This command is effective for all characters, except for HRI characters.
●
When characters are enlarged with different sizes on one line, all the characters on
the line are aligned at the baseline.
●
The ESC ! command can also turn double-width and double-height modes on or off.
However, the setting of the last received command is effective.
[Default] n = <00>H
[Reference] ESC ! , APPENDIX D – INTERNAL CHARACTER TABLES
GS ( A pL pH n m
[Name] Execute test print
[Format] ASCII GS ( A pL pH n m
Hex 1D 28 41 pL pH n m
Decimal 29 40 65 pL pH n m
[Range] ( pL + ( pH x 256)) = 2 (where pL = <02>H, pH = <00>H)
<00>H
≤
n
≤
<02>H, <30>H
≤
n
≤
<32>H
<01>H
≤
n
≤
<03>H, <31>H
≤
m
≤
<33>H
[Description]
●
Executes a test print with a specified test pattern on a specified paper.
●
pL , ph specifies ( pL +( ph x256)) for the number of the bytes after ph ( n and m ).
● n specifies the paper to be tested.
n Paper
<00> / <30>H
<01> / <31>H
<02> / <32>H Paper roll
●
m specifies a test pattern.
m Test pattern
<01> / <31>H Hexadecimal dump
<02> / <32>H Printer status print
<03> / <33>H Rolling pattern print
[Notes] ● This command has enabled only when processed at the beginning of a line.
●
After the test print is finished, the printer resets itself automatically. Therefore, data
already defined before this command is executed, such as user-defined buffer and
print buffer are cleared; and each setting returns to the default value.
● The printer cuts the paper at the end of the test print.
G S ( C pL pH NULL 6 NULL C L R
[Name] Erase all logos
[Format] ASCII GS ( C pL pH NULL 6 NULL C L R
Hex 1D 28 43 pL pH 00 36 00 43 4C 52
Decimal 29 40 67 pL pH 00 54 00 67 76 82
[Range] pL = <06>H (fixed), pH = <00>H (fixed)
[Description] Erases all logos stored in non-volatile memory.
[Reference] FS p, FS q commands.
32 of 53