Fenix Imvico TK41, Руководство по эксплуатации

Страница: 65 / 88

FENIX IMVICO TK-41 OPERATION MANUAL
65/88
GS ( K 2 0 0 m
[Name] Select the energized mode.
[Format] ASCII GS ( K 2 0 0 m
Hex 1D 28 4B 02 00 00 m
[Range] <01>H
≤
m
≤
<02>H
[Description]
•
m specifies the print control mode.
m Function
<01>H Specifies the non-divided print head energizing mode.
<02>H Specifies the two-part print head energizing mode.
[Notes]
When this command sets the two part energized mode (m = <02>H), the
maximum printing speed (150mm/s) is automatically prohibited.
[Default] m = <01>H
[Reference] GS E, PROGRAMMING MODE
GS ( K 2 0 1 m
[Name] Select the print density.
[Format] ASCII GS ( K 2 0 1 m
Hex 1D 28 4B 02 00 01 m
[Range] <F6>H
≤
m
≤
<FF>H and <00>H
≤
m
≤
<0A>H (corresponds to the print
density -50 to +150%)
[Description]
•
m specifies the print density.
•
If <F6>H
≤
m
≤
<FF>H, the print density set to be lighter (“<F6>” is the
lightest) than the standard density.
•
If m = <00>H, the print density is set as the standard.
•
If <01>
≤
m
≤
<0A>H, the print density is set to be darker (“<0A>” is the
darkest) than the standard density.
•
The print density in one line is always the same even if different density is
set. In this case, the last specified data for the print density is effective.
M
Dec Hex
Print Density
10 0A +50%
9 09 +45%
8 08 +40%
7 07 +35%
6 06 +30%
5 05 +25%
4 04 +20%
3 03 +15%
2 02 +10%
1 01 +5%
0 00 Standard
-1 FF -5%
-2 FE -10%
-3 FD -15%
-4 FC -20%
-5 FB -25%
-6 FA -30%
-7 F9 -35%
-8 F8 -40%
-9 F7 -45%
-10 F6 -50%
[Default] m = <00>H
[Reference] PROGRAMMING MODE